Angle Relief Valves

Advantages:

• Protect systems and equipment from dangerous overpressures.
• For use as back pressure valve, straight relief, by-pass relief or back pressure regulator.
• Offer wide range of pressure settings from 5-150 PSI (0.4-10.4 BAR) with sensitive operation.
• Designed with a PTFE® shaft for non-sticking operation in RVT series.
• Diaphram design RVD eliminates crystallization problems.
• Available in-line and angle patterns.
• Provide minimum maintenance through simple and efficient design.

Flow Rate Reference Chart for Angle Pattern Valves

Relief Valve Dimensions for Angle Pattern Valves

Plastic pressure relief valves are multi-functional, normally-closed valves for system pressure relief, pump protection, enhancing pump performance, by-pass relief, and balancing pressure in a process system.

For anti-siphon applications, Plast-O-Matic series RVDT features a unique PTFE® diaphragm.

Available in PVC, CPVC, Kynar PVDF, Natural Polypropylene, PTFE, and glass-filled Polypropylene; sizes 1/4" to 3" NPT.

Ideal for corrosive and other chemical process, as well as deionized water, reverse osmosis water...any ultra-pure liquid.

Plast-O-Matic relief valves deliver higher flow at lower overpressures than other typical relief valves. Operation is smooth, sensitive and extremely accurate.

ORDERING INFORMATION:

RV   T         050                 V    -     PV
 
 

     Series    050 (1/2") 20mm     Seals      Body Material
 
 

     T-RVT     075 (3/4") 25mm     V-Viton    PV-PVC
 
 

     D-RVD     100 (1") 32mm       B-Buna-N   CP-CPVC(CORZAN)
 
 

               125 (1-1/4") 40mm   EP-EPDM    PP-Polypro
 
 

               150 (1-1/2") 50mm              PF-PVDF/Kynar
 
 

               200 (2") 63mm                  TF-PTFE