Desiccator cabinets are designed as an economical environmentally controlled cab- inet for the storage of microelectronic devices, semiconductor wafers,electronic subassemblies, bio-chemical mixtures and pharmaceutical uses. 

They are assembled of clear and ultra-violet shielding amber acrylic with stainless steel hardware. The doors, which come hinged on the right or left side, come complete with neoprene gasketing and have 1-1/2" stiffening ribs, which are beneficial for applying labeling tape. 

The shelves have 3/16" holes for circulation of clean air or gases. The units come with 1/4" N.P.T. holes or hose barbs for the introduction of clean air or gases and can be located wherever it is convenient for you. 

Our desiccator cabinets are available with doors installed on both sides which make them usable as clean room pass-through chambers. They also have optional finish flanges available for attractive finishes in clean room installations. A new item recently introduced is the corner cabinet which occupies much less count space and still maintains the environmental control features of rectangular cabinets. 
 
 
 

DESSICATOR CABINETS  All dimensions are O.D.  Door openings are 3" smaller than OD  Doors can be hinged on right or left.  Doors can be installed on both sides for clean room installations.  "A" dimension can be mixed in multi door units. (Example: 3 door unit Top "A"=12 Middle "A"=16 Bottom "A"=24).  There is one fixed shelf between units in multi unit cabinets.  There is one removable shelf every 4 inches.  Flanges are available for clean room pass through installations/1 flange fixed - 1 flange loose.  ORDER INFORMATION Specify:  Number of Compartments  "A" Dimension of Each Compartment .("B" and C Dimensions will be the same for all.)  Hinged Right or Left  Regular or Pass Through  With or Without Flanges.