Tell A Friend About This Page!

Manual Valves, Fittings & Accessories

Bulkhead Fittings
1/2" to 4", PVC, CorzanT  CPVC

Bulkhead Fittings
Bulkhead Fittings
Selection Chart
Size Material End Connection Seals Pressure Rating
1/2"- 4"  PVC Socket x Thread, Thread x Thread EPDM or Viton® 150 psi @ 70F
non-shock
CPVC Socket x Thread
PPL Thread x Thread
Features
  • Safe-T-Loc design
  • Buttress threads protect against blowout
  • Hex body for one-person installation
  • Rated at a full 150 psi
 
 
Minimum Inside Diameters of Tanks for 
Safe-T-Loc Bulkhead Fitting Installation
Bulkhead
Size		 Min. Rigid
Tank I.D.		 Min. Flexible
Tank I.D.
1/2" 7.25" 5.56"
3/4" 10.00" 7.75"
1" 11.75" 8.94"
1 - 1/4" 16.25" 12.19"
1 - 1/2" 16.25" 12.19"
2" 25.75" 19.38"
3" 42.50" 36.25"
4" 90.00" 76.81"

Self Aligning Bulkhead Fittings
1", 2" and 3", PVC

Self-aligning bulkhead fitting
 
Selection Chart
Size Material End Connection Seals Pressure Rating
1", 2" and 3" PVC Thread x Thread EPDM,
TeflonT, Viton®		 75 psi @ 70F
non-shock
Features
  • Permit easy piping connections to domed tanks
  • Swivel ball connection corrects for curved tanks
  • Permit straight pipe connections up to 27 degrees of offset angle
 
Minimum Inside Diameters of Tanks for 
Self-Aligning Bulkhead Fitting Installation
Bulkhead
Size		 Min. Rigid
Tank I.D.		 Min. Flexible
Tank I.D.
1" 25.75" 19.38"
2" 42.50" 36.25"
3" 90.00" 76.81"

True Union Ball Check Valves 1/4" to 6", PVC, CorzanT   CPVC and PPL

True Union Ball Check Valves 1/4" to 6", PVC, CorzanT CPVC and PPL
  Ball check valve with foot valve screen installed True Union Ball Check Valves 1/4" to 6", PVC, CorzanT CPVC and PPL
Selection Chart
Size Material End Connection Seals Pressure Rating
1/4" - 3/8" * PVC Socket or Threaded Viton® 150 psi @ 70F
non-shock
1/2"- 4"
(120 - 110 mm)		 PVC Socket, Threaded EPDM
PVC or CPVC Socket, Threaded
or Flanged***		 Viton®
1/2" - 2"
(20 -63 mm)		 PPL Threaded
6" ** PVC Flanged
* Trim Checks   ** 4" valve venturied to 6"   *** 1/2" to 1-1/2" PVC and 1/2" to 3/4" CPVC not available flanged
Features
  • Square cut seat for positive sealing
  • Seats with minimum back pressure
  • For horizontal or vertical installation
  • 1/4" to 4" full port
  • 1/2" to 6" are Sure Block design
  • 1/4" & 3/8" are Trim Check design
Options
  • Foot valve screens
Cv Factors
Size Value Size Value
1/4" 1.2 1- 1/2" 45.0
3/8" 3.0 2" 130.0
1/2" 4.8 2 - 1/2" 170.0
3/4" 7.7 3" 250
1" 16.0 4" 400.0
1 - 1/4" 25.0 6" 340.0
Back