Automated Valves & Actuators

Solenoid Valves
1/4" to 1", PVC, and CorzanTM CPVC

Solenoid valve
Selection Chart
Size Material End Connection Seals Pressure Rating
1/4", 1/2"
3/4" and 1"
(20, 25, 32 mm)		 CPVC,
PVC* 		 Socket or
Threaded		 Viton®
or EPDM		 150 psi @ 70F
non-shock
*1/4" not available in PVC
 
Features
  • True Union design
  • Continuous or 100% duty applications
  • Corrosion-resistant polyester coil
  • Four-position electrical connection
  • Both 1/2" conduit or SJ-type cord

    • electrical connection
  • 110 VAC is standard
Optional Voltages
12 VAC, 24 VAC, 220 VAC, 12 VDC, 24 VDC
Cv Factors
Size Value Size Value
1/4" 1.3 3/4" 3.2
1/2" 2.2 1" 3.8

Operating Parameters
For optimum valve performance,
inlet pressure must not exceed
120 psi and differential pressure
must exceed 25 psi on closing -
for pressures above 25 psi. Flow
rate should not exceed 5 ft per
second.

True Union Ball Valves Equipped for Actuator Mounting
-1/4" to 6", PVC and CorzanTM CPVC

10a.jpg (10623 bytes)
Selection Chart
Size Material End Connection Diaphragm Pressure Rating
1/4"- 4"
(20mm, - 110mm)		 PVC or CPVC Socket, Threaded
or Flanged		 Viton® or
EPDM		 225 psi @ 70F
non-shock
6" * PVC Flanged
* 4" Venturied to 6"
Features
  • True union, Sure Block design
  • Rated to 225 psi
  • Double O-ring stem seals
  • Full port design for low 

    • pressure loss
  • TFE seats - 3", 4" and 6" 

    • O-ring backed
 		 Options
     
  • Electric actuators
  • Pneumatic operators
  • Stem extensions for 

    • 3", 4" and 6" valves
 
Cv Factors
Size Value Size Value
1/4" 1.0 1- 1/2" 90.0
3/8" 2.8 2" 150.0
1/2" 8.0 2- 1/2" 340.0
3/4" 16.0 3" 490.0
1" 30.0 4" 600.0
1- 1/4" 75.0 6" 550.0

Butterfly Valves Equipped for Actuator Mounting
1-1/2" to 24", with PVC, CPVC or PPL Bodies with PVC, CPVC, PPL or PVDF Discs

Butterfly valve
Selection Chart
Size Body Material Disc Material Seals Operators Pressure Rating
1- 1/2"- 8"
(50 mm - 225 mm)		 PVC, CPVC**
PPL***		 PVC, CPVC**, PPL or PVDF* EPDM, Nitrile
or Viton®		 Electric Actuator

Pneumatic Actuator

 150 psi @ 70F
non-shock
10", 12"
(280 mm - 315 mm)		 PPL*** PVC or PPL***
14" PPL*** PPL*** 105 psi
16" 90 psi
18" 75 psi
20" 56 psi
24" 56 psi
* PVDF disk not available on 1 1/2" and 2" sizes **CPVC not available in 8" size ***Glass fiber reinforced
Pressure Loss Calculator
Features
  • Fully supported flange bolt holes
  • Positive seal of liner to valve body
  • Integrally molded mounting pad
  • Stainless steel shaft 
 Options
  • Electric actuators
  • Pneumatic actuators
  • Stem extensions
  • Stainless Steel lugs
  • Titanium shaft
Cv Factors
Size Value Size Value
1- 1/2" 90 12" 6000
2" 125 14" 7000
3" 280 16" 8800
4" 575 18" 11,000
6" 1100 20" 14,500
8" 2500 24" 18,800
10" 4700 - -

Three-Way Ball Valves Equipped for Actuator Mounting
1/2" to 6", PVC and Corzan® CPVC

Three way ball valve

 
Selection Chart
Size Material End Connection Seals Pressure Rating
1/2"- 4" PVC or CPVC Socket, Threaded
or Flanged		 Viton®
or EPDM		 150 psi @ 70F
non-shock
6" PVC Flanged
Features
  • Double O-ring stem seals
  • Integrally molded mounting pad
  • One-piece body
 Options
  • Electric actuators
  • Pneumatic actuators
  • Stem extensions for 3", 4" and 6" sizes
Cv Factors
Size Value Size Value
1/2" 3.0 2" 58.0
3/4" 7.0 3" 190.0
1" 12.0 4" 450.0
1 - 1/2" 30.0 6" 340.0
Back