Flow Indication with Totalizer - Standard indication of flowrate and totalized flow
Large Digital Display -3.5-mm character height
Easy Calibration - Calibration is done through the keypad, no tools or equipment are required
NEMA 4X Enclosure - Corrosion resistant
Versatile Mounting - Panel-mounting or optional wall-mounting enclosure
Flow Alarms - Model 2350 has user-selectable High and Low flow alarms as standard

Model 2350 (only)

Alarms: Two adjustable High and Low alarms, indicated on display 
Relays: Two unpowered SPDT contacts rated 66 VA. Relays are activated on rising flowrate (set at Low Alarm 2 and High Alarm 2) and are deactivated on falling flowrate (set at Low Alarm 1 and High Alarm 1)

Used with Model 2000 flow sensors, these NEMA 4X compact monitors are simple to operate and calibrate. A front keypad with three pushbuttons provides the user interface to toggle the display between flow rate and totalized flow, reset the total, and calibrate the display. Calibration is easy and merely involves entering a scaling factor based on type and size of installation fitting used.

Display Type: 6-digit LCD for flow rate or totalized flow (user-selectable)
Volumetric Units: Flow rate in GPM, totalized flow in gallons
Operating Range: 6.3 to 420 Hz
Input: Square wave, 12 to 24 V p-p from Model 2000 sensor
Sensor to Indicator Distance: Up to 325 ft (100 m)
Accuracy: ±1 % of indicated flow over the full calibrated range
Power Requirement: 110 V AC, 50/60 Hz or 24 V DC. Note: indicator provides 12 V DC power to the sensor
Electrical Connection: 8-point (Model 2300) or 15-point (Model 2350) terminal strip on rear of unit
Enclosure Rating: NEMA 4X (IP65) when panel mounted
Operating Temperature: 32 to 140F (0 to 60C)
Enclosure Materials: ABS
Mounting: Panel
Options: Wall-mounting enclosure (rated NEMA 4X) with two cable glands to accept 4-conductor shielded cable from sensor

Dimensions

Halar is a TM of Ausimont USA Inc.
Viton is a TM of DuPont Dow Elastomers