|
AnalogFlow Indicator  |
Flow Meters & Instrumentation |
 |
|
||||||
| Economical Flow Monitoring
- A flow indicator that combines accuracy with affordability
Highly Visible Analog Display - Also, the dampened meter movement provides for easy reading, even with pressure fluctuations. Corrosion Resistant Enclosure - The NEMA 4X enclosure is easily panel mounted. Versatile - Six dial scales are provided as standard for application versatility. Easy Setup - Calibration is easy and accessible from the front of the indicator. |
|||||||
| . | |||||||
 |
|
||||||
| The FloSite Model 2200 Flow Indicator is a low cost easy-to-install
flow monitor. Used with the Model 2000 Flow Sensor, it provides both accurate
and reliable analog monitoring of pipeline flow rates.
This NEMA 4X-enclosed indicator can be panel mounted or surface mounted using the optional rear cover. The highly visible analog display provides easy viewing of the flow rate from a distance. Meter dampening is provided to minimize the effect of pressure fluctuations on the indicator reading. Installation merely requires the unit to be calibrated to the application's maximum flow rate. The unit is typically field-calibrated through a simple procedure with calibration adjustment accessible from the front of the meter. |
|||||||
| . | |||||||
|
|||||||
.
|
|||||||
|
|||||||
| Display Type: Analog with taut-band movement,
oil-damped, 250° deflection (not suitable for prolonged vibration)
Operating Range: 6.3 to 420 Hz Volumetric Units: Flow rate in GPM Dial Ranges: 0-2, 0-4, 0-6, 0-8, 0-10, 0-100 (on 3 reversible dials) in GPM, provided as standard Input: Square wave, 12 to 24 V p-p from Model 2000 flow sensor Sensor to Indicator Distance: Up to 325 ft (100 m) Accuracy: ±1.5 % full scale Power Requirement: Any supply voltage between 12 and 24 V DC Enclosure Rating: NEMA 4X (IP65) when panel mounted Operating Temperature: 32 to 140F (0 to 60C) Enclosure Materials: ABS Mounting: Panel |
|||||||
