The Flo-Thru Trench Drain Submittal Pages can be viewed and printed using the Adobe Acrobat© Reader 4.0 Plug-In.  If you do not have this plug-in, it can be downloaded free from Adobe.  Click the Adobe Reader graphic to download the plug-in. 
You MUST have Acrobat©  Reader Version 4.0 to view properly
Perma-Trench acroread.gif (1722 bytes)
 
(Click on photo for larger image) Product
Number		 Description Product
Information
Z-882 Z-882 PERMA-TRENCH SYSTEM
Zurn Z-882 12" [305 mm] wide pre-sloped trench drainage system. High density polyethylene structural composite drain channel with 1.04% (1/8" [3.18 mm] per foot) bottom slope. All sections are modular 8-foot [2.45 M] lengths with interlocking ends and radiused bottom. Complete with heavy-duty, Dura-Coated steel frame with anchor studs at surface, combination anchor tabs/leveling devices at appropriate locations and extra heavy-duty cast iron grate with lockdown hardware.
 
 
Z-883 Z-883 PERMA-TRENCH SHALLOW SYSTEM
Zurn Z-883 6" [152mm] wide shallow trench drainage system. High density polypropylene structural composite drain channel with 3.5" depth. All sections are 40" modular lengths with integral top frame, interlocking ends, and radiused bottom. Combination tie-down/leveling devices at 20-inch intervals. Furnished with heavy-duty, Dura-Coated cast iron grate unless otherwise specified.
 
 
Z-886 Z-886 PERMA-TRENCH SYSTEM
Zurn Z-886 6" [152 mm] wide pre-sloped trench drainage system. High density polyethylene structural composite drain channel with .75% bottom slope. All sections are 80-inch modular lengths with integral top frame, inter-locking ends and radiused bottom. Combination tie-down/ leveling devices at 20-inch intervals. Furnished with heavy-duty, Dura-Coated cast iron grate unless otherwise specified.
 
 
Z-886-ST Z-886-ST PERMA-TRACK SYSTEM
Zurn Z-886-ST 6" [152 mm] wide radiused trench drainage system. High density polyethylene composite modular system with pre-radiused trench sections that conform to the inside perimeter of a typical 400 meter running track. Typical invert of the radiused sections is 5.3 inches [134 mm]. Complete with galvanized steel slotted grating and combination anchor tabs/leveling devices at appropriate locations.